| |
1. Brinell Microscope
We offer a compact and versatile instrument for linear measurement which has a pre-focussed objective and is therefore, suitable only for flat objects. The measurements are directly read on glass scale incorporated in the eye piece. The reticle is calibrated in 0.1 mm units over a range of 7 mm and the diameter of microscope field is 8mm.
This microscope has a magnification of 25x which allows the user to measure the diameters of indentations made by the ball indenters of all brinell type hardness testing machines. This microscope is also easily used as a calibrated portable microscope and is supplied with 7w-220v lighting attachment.
2. Diamond Interiors
For 'C' Scale, Superficial scale & Vickers Hardness
3. Hardness Test Blocks
| |
|
HRC |
|
HB2.5/187.5kgf |
200-250, 250-300 |
HRB |
40-70, 80-100 |
HB 5/ 750 kgf |
300-350, 350-400 |
HRA |
As Applicable |
HB 10/3000 kgf |
350-400, 400-450 |
|
|
|
450-500, 500-550 |
| Superficial Scales |
|
Vickers |
|
|
|
|
|
|
|
|
|
|
|
Note : 1. Harness Test Blocks are supplied along with Test certificate traceable to National Standard i.e. NML, Chennai / NABL.
2. Hardness testing Blocks Having traceablity wiyh UKAS of UK.
4. Steel Ball Indentors :
1/16'' , 1/8'' , 1/4'' , 1/2'' , 2.5 mm, 5 mm & 10 mm
a) For Rockwell Harness Tester with shank size of 6.35 mm dia.
b) For Rockwell Harness Tester with
Ball seat (tapping size 3/8" BSP).
5. Carbide Balls : TC Balls of all size are avialable.
6. Anvils
a) 50mm, 100 mm and 200 mm dia. Flat hardened and ground.
b) 40 mm, 70 mmdia Vee Anvil.
c) Spot Anvil (Raised center table )shallow anvil.
d) Shallow Vee Anvil.
e) Eye Ball Anvil for taper components like screw driver, chisel etc.
f) Diamond spot Anvil for thin sheets.
7. Dial Gauge : For Rockwell, Superficial and Brinell Harness Testers.
|
|
